drag sideways to rotate the prism
White light goes in
and the prism opens it
into all its colors.
01

1. What light is

Key idea · Light is an electromagnetic wave. Its color is its wavelength. The human eye only responds to wavelengths between 380 and 750 nanometers.

An electromagnetic wave travels through a vacuum at c = 299 792 km/s. The only thing that distinguishes one color from another, and visible light from an X-ray or a radio wave, is the wavelength λ: the distance between two crests. Frequency and wavelength are tied together by the speed.

c = λ · νEphoton = h · c / λ

The second formula matters in NDT: the shorter the wavelength, the more energy each photon carries. That is why ultraviolet excites a fluorophore and infrared does not; that is why X-rays pass through steel and visible light does not.

RegionWavelengthWhere it appears in NDT
X-rays and gamma rays< 10 nmRadiography (RT)
Ultraviolet A315 – 400 nmFluorescent penetrants and particles (365 nm lamp)
Visible380 – 750 nmVisual inspection (VT), visible penetrants and particles
Infrared750 nm – 1 mmThermography (IR)

2. Why the prism at the top splits the light

Key idea · Light travels more slowly in glass than in air. When it changes speed, it changes direction. And each color slows down slightly differently: that is dispersion.

The refractive index n tells you how many times slower light travels inside a material. In air it is almost 1; in ordinary glass, around 1.5. Snell's law relates the angles of incidence and refraction, measured from the normal to the surface:

n = c / vn1 · sin θ1 = n2 · sin θ2

The glass prism at the top does both things at once. It lets the text behind it show through, but shifts and distorts it because each face bends the rays. And the white beam entering from the left is bent twice, once at each face, and since n is slightly larger for blue than for red, blue bends more at both faces and exits lower. That is the whole secret of the fan of colors: the prism does not create it, it was already inside the white light. If you raise the dispersion control the fan opens wider and the edges of the text take on red and blue fringes; if you lower it to zero, the beam exits white and the text looks clean.

Rotate the prism by dragging. There is an angle at which the fan is narrowest, the angle of minimum deviation, and if you keep rotating there comes a point where the beam no longer exits through the second face but bounces back inside: total internal reflection.

The same chromatic aberration shows up in cheap VT magnifiers and borescopes, and it limits how far an image can be magnified before the edges blur.

3. Prism: white light opens into colors

Each ray is computed with Snell's law at both faces of the prism. The index follows the Cauchy relation n(λ) = A + B/λ²; the dispersion control changes B and is deliberately exaggerated compared with real glass so the fan is visible at this size. When the prism is rotated more than about 35°, some rays reach the exit face beyond the critical angle and are reflected back inside instead of exiting. This is total internal reflection, the same effect that guides light inside an optical fiber.

0°
60 %

4. Red, green and blue: how white is formed

Key idea · The primary colors of light are red, green and blue. Yellow is not a primary: it is what the eye perceives when red and green reach it at the same time.

The retina has three types of cones, sensitive to red, green and blue. Every color we see is a combination of how much each one is excited. That is why three lights are enough to form almost every color, and why a screen only needs three subpixels. Adding lights together is called additive mixing, and it is the opposite of mixing paints: with light, the more you add, the brighter it gets; all three at full give white.

255
255
255
60
R + G = G + B = R + B = R + G + B =

Lower the blue to zero and the center turns yellow. That on-screen yellow contains no 580 nm wavelength at all: it is two different lights the eye cannot tell apart. A prism would separate them.

5. The visible spectrum and NDT lamps

The band shows the color the eye perceives at each wavelength. Outside 380 – 750 nm there is real light that we simply cannot see: ultraviolet on the left and infrared on the right. Move the control to sweep across it.

555 nm

Why a fluorescent penetrant looks green

The inspection lamp emits UV-A centered at 365 nm, which the eye cannot see. The dye in the penetrant or particles absorbs those photons and gives the energy back as light of a longer wavelength, between 520 and 560 nm. This shift toward green is called the Stokes shift, and it lands right where the eye is most sensitive: 555 nm. The indication glows against a black background because the only visible light in the room is the light emitted by the defect.

MethodSourceTypical requirement (ASME V)
Fluorescent PT / MTUV-A 365 nm≥ 1000 µW/cm² at the part; ambient visible light ≤ 20 lx (2 fc)
Visible PT / MT, VTWhite light≥ 1076 lx (100 fc) at the surface

Values are those of ASME BPVC Section V; always confirm against the applicable edition and procedure.

6. Check your understanding

Why does the edge of the text behind the cube look red on one side and blue on the other?
Because the refractive index depends on wavelength. Blue has a higher index and bends more than red; each face of the cube slightly separates the colors, just like a prism.
If a screen shows yellow, is it emitting 580 nm light?
No. It emits red and green at the same time. The eye cannot tell that mixture apart from pure spectral yellow, but a prism would split it into two lines.
Why is fluorescent penetrant inspection done in the dark?
Because the indication is the only source of visible light. The lamp emits invisible UV-A; the dye converts it into green at about 550 nm. Any ambient white light competes with that emission and lowers the contrast, which is why the code limits ambient light to 20 lx.