FOERSTER CIRCOGRAPH DA

Non-contact eddy current inspection system with rotating sensors for detecting longitudinal surface defects in tubes, bars, wire, and bright-finished profiles at production speed.

Up to 256 channels
Up to 6 m/s
Non-contact inspection
C-Scan display
CIRCOGRAPH DA
1 / 2

Key features

  • Signal digitization directly at the sensor to reduce interference.
  • Up to 256 real-time test channels, without multiplexing.
  • Adjustable excitation frequencies from 30 kHz to 1 MHz in 100 Hz increments.
  • Patented digital speed-shift filter that adapts to the test speed.
  • C-Scan display showing the longitudinal and circumferential position of the defect.
  • Modular, Ethernet-based architecture, expandable with DEFECTOMAT DA.
ChannelsUp to 256 · real time
Frequency30 kHz to 1 MHz
Test SpeedUp to 6 m/s

The CIRCOGRAPH DA, FOERSTER sets new standards in non-destructive eddy current testing of long products such as tubes, bars, and wires to detect longitudinally oriented surface defects. CIRCOGRAPH DA It offers unmatched reproducibility at high test speeds by combining advanced digital electronics with a sophisticated system architecture. Digitization takes place directly in the sensor. To reduce potential external interference, the signal paths of the analog test signals have been minimized. Equipped with the latest technology and intelligent features, the CIRCOGRAPH DA It can also be integrated into existing production lines.

Better Overview by Displaying Test Signals as a C-Scan

The new generation of CIRCOGRAPH DA products allows test signals to be displayed as a C-scan. The signal sequence is displayed, as usual, as the sum of the signal over the distance. The defect’s position is shown in the longitudinal direction. In addition, in the C-Scan view, the signals are now also displayed in the circumferential direction. This gives the operator a better view of where—and, above all, how—the defect propagates across the material’s surface.

The advantages:

– Compact and robust design for industrial applications.
– Future-proof thanks to its modular design, ready for future expansions.
– Option to expand with DEFECTOMAT sensor systems.
– Up to 256 measurement channels without multiplexing.
– Digitization directly at the sensor.
– Continuously adjustable test frequencies from 30 kHz to 1 MHz in 100 Hz increments.
– Digital speed-dependent filter: the filters dynamically adjust in response to speed.
– CIRCOGRAPH rotating heads that enable non-contact testing at test speeds of up to 6 m/s.

General

BrandFoerster
MethodEddy Currents

Screen

Display ModesTest Signal and C-Scan

Receiver

FiltersDigital speed shift, dynamic adjustment of the filter position based on the test speed

Eddy Currents

Test Frequency30 kHz to 1 MHz, continuously adjustable in 100-Hz increments
ChannelsUp to 256, in real time without multiplexing
Sensor MonitoringBroken cables, overload, and automatic sensor recognition

Eddy currents

Compatible ProbesRotary sensors
Test SpeedUp to 6 m/s

Data

Operating softwareDEFECTOTEST DA ECT

Connectivity

PortsIndustrial Ethernet and configurable I/O interfaces for production line integration

Standards

ComplianceDIN EN ISO 15549, General Principles of Eddy Currents
PatentUS 8907828 B2, Institut Dr. Foerster GmbH & Co. KG; also protected in other countries

Optional Accessories

DEFECTOMAT DAAdditional sensor system that can be integrated to expand the inspection range
Piping